![]() It will be text only, but you can still use git and all your other command line tools. This is where it gets cool: it's possible to get the Mac terminal displayed on the remote terminal. Running the shell on the external terminal You can't go wrong starting with 9600N8 and then speed up from there. Confirm baud rates, parity and bit settings are the same. with local echo turned off, every keypress should still be displayed on the screen). Still not working? Are you sure the external terminal is working? Cross over the RX and TX pins on the terminal's serial port to see if you get an echo (i.e. Note: Not working? Check that you have the right serial cable, and if necessary use a NULL MODEM adaptor to correct the wiring. Set both systems to the same baud rate and anything you type on the Mac should appear on the terminal, and vice versa. Serial will list all the available ports, select the USB dongle and connect. The simplest way to check everything is good is to connect the Mac via the USB/Serial Dongle to the terminal, and start a terminal emulator program such as Serial on the Mac. For example, most vintage terminals use RS232 serial ports to connect, and these can be connected to a Mac via a USB/Serial Dongle.īefore going any further, it's worth checking the serial link is working. It is possible to connect an external physical terminal to a Mac, and use it to display a remote terminal session. How to connect an external terminal to a Mac and PC.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |